Silent Hill Townfall X-Ray Room Code: 7103 and Scan Settings

The Silent Hill Townfall X-Ray Room code is 7103. Follow the skull and chest scan settings, lightboard order, and The Patient surgery route.

Silent Hill Townfall X-Ray Room Code: Quick Answer

The Silent Hill Townfall xray room code is 7103, and entering it on the small door at the back of the operating room opens the X-ray room. You need the Silent Hill Townfall xray room code during The Patient surgery sequence, where you must scan both the skull and chest before diagnosing the patient.

The code arrives through your pager after Dr. Glenn asks you to investigate the patient's condition. Once inside, you will need to operate the imaging camera, configure two different X-ray settings, and place the completed scans on the lightboard in the main surgery room.

Here is the essential information at a glance:

RequirementSolution
X-ray room code7103
First scanSkull
Second scanChest
Skull settingsSite: Skull, kV: 3, mA: 7, Time: 1
Chest settingsSite: Chest, kV: 7, mA: 3, Time: 1.2
Final stepPut both scans on the surgery room lightboard

This guide covers the entire sequence, including the vital readings before the scan, the X-ray alignment process, the medication search, and the final intubation step.

How to Enter the X-Ray Room

At the beginning of Part 3, you are in the operating room with the patient. Dr. Glenn communicates through the intercom and asks for several vital readings. Finish that conversation first. The pager should then provide the number needed to access the imaging room.

Walk to the small door at the rear of the operating room and interact with the keypad. Enter 7103 to unlock it.

ActionWhat to do
1Complete Dr. Glenn's vital-sign questions
2Wait for the pager message
3Go to the small rear door
4Enter 7103
5Enter the X-ray room and activate the PC

If the keypad does not accept the number, check that you have completed the intercom conversation and received the pager instruction. The door is not intended to open before that story trigger.

Before entering the X-ray room, it is also useful to understand the earlier monitor puzzle. Choosing an incorrect vital sign can cause damage, so do not select values randomly.

Vital signCorrect reading to reportHow to identify it
Blood pressure70 over 40Use the low blood-pressure reading shown on the monitor
PulseAbout 160A reading may briefly display 162, according to player experience
Blood oxygen80%Select the value above the unreliable lower range

The PC in the main room provides guidance about which readings are likely to be reliable. A pulse near 160 and oxygen saturation at 80% are the important values for this sequence.

Skull X-Ray Solution

Turn on the PC in the X-ray room. The display initially identifies the target as the skull. Your task is to reposition the imaging camera until the patient's head is centered inside the circular aiming area.

Use the left stick to move the camera and the right stick to adjust the zoom. The exact inputs vary depending on your platform and current camera position, so focus on the alignment indicator rather than trying to reproduce a single movement sequence.

Skull scan stepRequired action
1Activate the X-ray room PC
2Confirm that the target says Skull
3Raise the camera to a relatively high position
4Center the outline of the patient's face
5Adjust zoom until the skull fits the circle
6Wait for the display to confirm alignment
7Set the machine controls
8Turn on Power and press Alignment X-ray

The screen should confirm that the patient skull is aligned before you take the scan. If the message does not appear, make small camera adjustments instead of repeatedly pressing the exposure button.

Skull Machine Settings

The controls beside the PC determine whether the scan is valid. Set every dial to the following values:

ControlSkull value
SiteSkull
kV3
mA7
Time1

Once the settings are correct, switch on the machine's power. Then press the green Alignment X-ray button. The scan should be captured when both the camera position and machine settings are correct.

A common mistake is to align the head successfully but forget to change the machine's site from the default selection. Another is entering the right numbers for the skull but using the chest site. Check the complete set of controls before taking the exposure.

Chest X-Ray Alignment and Settings

After the skull scan, change the target on the PC to the patient's chest. This is usually the more difficult part of the Silent Hill Townfall xray room code puzzle because the correct target is not as high as many players initially expect.

Position the imaging view around the middle of the patient's torso, near the area where the cables and equipment meet. The chest target is not simply the upper torso above the wires. Adjust the camera until the chest sits inside the center circle and the PC confirms alignment.

Chest scan stepRequired action
1Change the imaging target to Chest
2Move the camera toward the middle of the torso
3Avoid aiming too high above the wires
4Use zoom to fit the chest in the circle
5Wait for the alignment confirmation
6Change all X-ray machine settings
7Turn on Power
8Press Alignment X-ray

Player experience indicates that slow, incremental adjustments are more reliable than large camera movements. If the target disappears from the center, zoom out slightly, reposition the camera, and then zoom back in.

Chest Machine Settings

The chest requires a different exposure configuration. Set the controls exactly as follows:

ControlChest value
SiteChest
kV7
mA3
Time1.2

The most important differences are the swapped kV and mA values and the longer exposure time. Do not reuse the skull configuration.

After the chest is aligned, activate the power switch and press the green Alignment X-ray button again. If the game does not register the scan, verify these three points:

  • The PC confirms that the chest is aligned.
  • The machine site is set to Chest.
  • The time control displays 1.2 rather than 1.

What to Do After Both Scans

Completing both exposures does not immediately finish the surgery puzzle. Return to the main operating room and walk to the large lightboard on the wall.

Interact with the board and choose the option to use the X-rays. Select both the skull and chest scans so they can be displayed. This allows Zoe to examine the images and report the findings to Dr. Glenn.

ObjectiveLocationCompletion condition
Capture skull imageX-ray roomSkull scan completed
Capture chest imageX-ray roomChest scan completed
Analyze imagesMain surgery roomBoth scans placed on lightboard

If the lightboard does not offer the correct images, return to the X-ray room and check whether one of the exposures failed. The camera can appear close to aligned without triggering the confirmation, so the on-screen status is more important than visual proximity.

The Silent Hill Townfall xray room code only opens the imaging area. You still need to finish the lightboard interaction before the next part of The Patient sequence begins.

Medication Locations and Dosage Rates

After the X-ray section, the game sends you through the hospital to collect three medications. You may find additional health items and medicines, but only three specific treatments are required for this puzzle.

MedicationAmountLocation
Tensobromide11 mgPharmacy Store in Victoria Ward, ground floor
Dextracyclate2.5 mgChapman Ward, first floor, Bay 6 infusion machine
Hydroxalene3 mgRecords Room in Chapman Ward, ground floor

Tensobromide is inside a green container in the Pharmacy Store. Dextracyclate can be collected from the infusion machine at Bay 6. Hydroxalene requires an additional access code before you can search the Records Room.

The Records Room code is 2605. Find it on a noticeboard in the upper-left office on the first floor of Chapman Ward. Enter that number at the Records Room door, then search the large metal cabinet for the green Hydroxalene container.

Setting the Infusion Pumps

Return to the operating room after collecting all three medications. The patient weighs 88 kilograms, according to the whiteboard, and that weight determines the required delivery rates.

MedicationPump delivery rate
Tensobromide8
Dextracyclate15
Hydroxalene7

Load one medication into each infusion pump. Select Set Rate, enter the corresponding number, confirm it with the check button, and then choose Ready Pump.

Before starting treatment, inspect the small controller beside the patient's bed. It should report that all three pumps are ready.

Controller statusMeaning
Pump 1 - ReadyFirst medication is configured
Pump 2 - ReadySecond medication is configured
Pump 3 - ReadyThird medication is configured
All three readyTreatment can begin

Press Start on the controller only after every pump shows the ready status. The order of the medications across the three pumps does not matter; the delivery rate assigned to each medication does.

Intubation and Puzzle Completion

The final stage begins after the medication has been administered. You will receive the phone number 5353 and must use the phone in reception to contact hospital storage.

Call the number from the reception phone. The storage worker will send the elevator to your location. Take the elevator to the basement and enter the Storage room.

Intubation stepAction
1Go to the reception phone
2Call 5353
3Enter the elevator near reception
4Travel to the basement
5Enter Storage
6Move through the gap between the shelves
7Pick up the intubation kit
8Return to the surgery room
9Use the kit on the patient

The kit is on a table beyond the narrow gap between the storage shelves. Several basement rooms contain documents or supplies, but Storage is the room relevant to this objective.

Back in the operating room, use the intubation kit on the patient. The final interaction is a timing-based minigame: move the control and hold it steady when the equipment vibrates. Complete the sequence to finish The Patient surgery puzzle.

Common Mistakes to Avoid

The fastest way through the X-ray section is to verify each requirement before pressing the exposure button. The following errors are especially common:

MistakeFix
Entering the wrong door codeUse 7103 on the rear operating-room door
Aiming at the upper torso for the chest scanTarget the middle of the chest
Reusing skull settings for the chestChange the site, kV, mA, and time
Taking a scan before alignmentWait for the PC confirmation
Forgetting the lightboardPlace both scans on it in the main room
Searching for the wrong medicationUse the three locations listed above
Starting pumps too earlyConfirm all three displays say Ready
Looking for the intubation kit upstairsCall 5353 and search basement Storage

For additional coverage of the wider surgery sequence, consult this Silent Hill Townfall surgery puzzle walkthrough from VGC.

FAQ

What is the Silent Hill Townfall xray room code?

The Silent Hill Townfall xray room code is 7103. Enter it on the small keypad door at the back of the operating room after receiving the pager message.

What are the skull X-ray settings?

Set the site to Skull, kV to 3, mA to 7, and time to 1. Align the patient's skull in the center circle before activating the power and pressing Alignment X-ray.

What are the chest X-ray settings?

For the chest, use Site: Chest, kV: 7, mA: 3, and Time: 1.2. Aim at the middle of the torso rather than the area above the wires.

Is 2605 also an X-ray room code?

No. 2605 opens the Records Room in Chapman Ward and is used to retrieve Hydroxalene. The Silent Hill Townfall xray room code remains 7103.